S
UP’AIR
_
LEAF_Light
Page
9
glider user's manual LEAF Light
PRE-FLIGHT PREPARATION
Unfold the glider and place it on its upper surface in an arc.
Separate the A,B,C risers and the brakes, be certain that the risers and lines don't have any twists or knots or aren't caught in twin,
stone etc...
The LEAF Light glider was designed for pilots in progression.
To discover your new wing, we will advise you to conduct your first small flights in calm conditions on a school training hill or a familiar
site you are used to flying with your own harness.
Caution !
It vital to conduct a thorough pre-flight check and have the harness properly connected to the glider prior each takeoff.
Run through the following procedure prior each takeoff:
-
harness or carabiners do not show signs of wear and tear.
-
the reserve parachute container is correctly closed and the handle is in the correct position
-
your personal settings have not been changed
-
The wing is properly connected to the risers with all links securely tightened and locked in place.
-
The wing is properly connected to the harness without any riser twist.
-
You are securely connected to the harness with the leg and chest strap buckles closed, self-locking carabiners locked.
-
Your are wearing your helmet and it is properly fastened.
Summary of Contents for LEAF Light
Page 21: ...SUP AIR _LEAF_Light Page 21 glider user s manual LEAF Light CERTIFICATES LEAF Light XS...
Page 22: ...SUP AIR _LEAF_Light Page 22 glider user s manual LEAF Light CERTIFICATES LEAF Light S...
Page 23: ...SUP AIR _LEAF_Light Page 23 glider user s manual LEAF Light CERTIFICATES LEAF Light M...