Harness User’s manual
S
UP’AIR
_
ACCESS AIRBAG
Page 20
SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
ACCESS AIRBAG
W
ithout twisting the risers, connect them to the harness attachment loops using the self-
locking carabiners.
Check for the risers to be properly positioned and untwisted. The «A» risers must be
located at the front and facing the flight direction (see diagram).
Lastly, check for the main self-locking carabiners to be fully closed and locked in place.
Connecting the wing to the harness.
Connecting the wing to the harness.
Install the accelerator by following the pre-
vious instructions.
Connect it to the wing using the split
hooks.
Once the accelerator/speedbar is
connected adjust its length according to
the wing recommended measurements.
For correct use there must not be
any line
tension at the split hook level when the
accelerator/speedbar line is fully relaxed.
Installing the accelerator.
Self-locking
carabiners.
Harness
Flight direction.
« A » risers
Tips : as
found on each ENOA wing, the attachment points to the harness are similarly
identified with the following color coded markers : right in green and left in red.
left side.
