Harness User’s manual
S
UP’AIR
_
ACCESS AIRBAG
Page 14
SUP’AIR manufactures its harnesses in Europe. Most of the components used are Made in Europe.
ACCESS AIRBAG
Installing the reserve parachute.
1.
- Open the 7mm
square Maillon Rapide®.
- Connect the reserve
parachute single riser
loop.
- Push the maillon
through the plastic ring
- Twist
3.
- Give a second
twist to the plastic ring.
- Push the buckle
through the maillon.
2.
- Push the end riser
through the toric ring.
- Push the maillon
through the risers
buckles.
4.
- Repeat steps 1 through
3 with the second riser.
Reserve parachute/harness connection with separate risers.
>> Separate riser reserve parachute connection.
>> Risers to ACCESS AIRBAG harness connection using a loop to loop ( Lark’s head ) knot.
2.
- Attach each riser to the shoulder attachment
points by making a Lark’s knot ( loop to loop connec-
tion ). Use the largest bridle loop ends.
1.
- Unfasten the Velcros
located alongside the
shoulder protective slee-
ves to reach the reserve
parachute shoulder straps
connection loops.
3.
-
Assemble everything correctly.
- Make sure for the risers not to be longer than
one another.
- Tighten each connection securely.
5.
-
Tidy up the assembly.
- Be certain for the riser end
loops to be securely fastened.
- Close the Maillon Rapide®
tightly by hand.
- Tighten using pliers and mak-
ing a
turn.
One (1) square 7mm Maillon Rapide® will be two (2 flexible toric rings.
