SUOMY C1GL0003, Instructions For User

Page: 32 / 84

EN
USE AND MAINTENANCE
BACK SIZE STRAP ADJUSTER - (see picture 7)
When provided (or in case of purchase of a Velcro spare strap size adjuster) adjust as indicated in the previous
point by changing the strap’s length after it has been positioned on the occipital lobe.
Slide the strap to tighten it and then apply pressure on the Velcro to secure it.
COMFORT PADDING - (see pictures 8 A)
The internal padding can be easily removed for washing or replacing.
Internal padding The internal comfort padding is fixed to the helmet by Velcro.
Removal
Carefully lift the padding from the internal cap of the helmet and detach it from the Velcro
(pic. 8 A).
Insertion
Lay the internal padding against the interior profile of the helmet. Exert a slight pressure
inside on the Velcro straps to ensure the correct fitting (pic. 8 B).
Make sure that it is properly positioned.
ANTI-RAIN SHELL
If provided, it is available as original Suomy spare parts, a special protective anti-rain shell to be fixed and fitted
over the helmet, as shown in pict. 9.
02_SUOMYSP_201804_Libretto GLIDER_EN:Layout 1 19-04-2018 19:21 Pagina 32