Notes: 1)
㧗
24V DC and
㧗
5V DC are isolated.
2) The current consumption is the sum of the max. current supplied to the connected S-LINK I/O units devices (D and
G lines only) and the current consumption of the S-LINK control board.
3) Since fuse for replacement is not provided, please arrange it separately (
Ǿ
5.2
20mm, 5A).
4) For details, please refer to the S-LINK Design Manual.
5) It is necessary to load the driver program before using this board. Please download the driver program from our internet
home page (http://www.sunx.co.jp/). [Driver program is available for DOS, Windows 95/98 and Windows NT.] If
you cannot access our internet home page, please contact our sales office.
6) These are the values for the control board only. When the control board is fitted in the computer, the values among
the control board and the computer specifications which are smaller apply.
̪
1
㧦
PICMG and Compact PCI mentioned in the above table and elsewhere are the registered trademarks of PCI Industrial Co
mputers Manufacturers Group.