SUNWE LCR-9073A, Operation Manual, Page: 15 / 15

D9 Decimal Point(DP), position from right to the
left
0 = No DP, 1= 1 DP, 2 = 2 DP, 3 = 3 DP
D8 to D1 Display reading, D1 = LSD, D8 = MSD
For example :
If the display reading is 1234, then D8 to
D1 is : 00001234
D0 End Word
RS232 FORMAT : 9600, N, 8, 1
Baud rate 9600
Parity No parity
Data bit no. 8 Data bits
Stop bit 1 Stop bit
10. BATTERY REPLACEMENT
1)When the Display will show " BAT " indicator, it
should to replace the battery although accurate
measurement may still be kept within certain period.
2)To replace the battery, loss the " battery cover screw "
( 3-10, Fig. 1 ) slide the battery cover ( 3-11, Fig 1 )
always from the meter and remove the battery
3)Install a new 9v (pp3 type) battery and replace the cover.
13
0905-LCR9073A