Synway Information Engineering Co., Ltd
SMG Series Analog Gateway User Manual (Version 1.5.3)
Page 81
Server Address
The address of the server to receive CDR.
Server Port
The port of the server to receive CDR.
NTP
Sets whether to enable the NTP time synchronization feature. It is required to fill in
NTP Server Address
,
Synchronizing Cycle
and
Time Zone
in case NTP is
enabled. By default,
NTP
is disabled.
NTP Server Address
Sets the Server address for NTP time synchronization.
Synchronizing Cycle
Sets the cycle for NTP time synchronization. The default value is 3600.
Daily Restart
Sets whether to restart the gateway regularly every day at the preset
Restart Time
.
By default, this feature is disabled.
Restart Time
Sets the time to restart the gateway regularly.
System Time
The system time. Check the checkbox before
Modify
and change the time in the
edit box.
Time Zone
The time zone of the gateway.
3.9.2 Network
Figure 3-92 Network Settings Interface
See Figure 3-92 for the network settings interface. A gateway has two LANs, each of which can be
configured with independent network type, IP address, subnet mask, default gateway and DNS
server. Network Type has three options: Static, DHCP and PPPoE. If PPPoE is used, it is
necessary to enter the username and the password of the network. By default, LAN1 is enabled
and LAN2 is disabled.
Note:
1. The values of the IP address, Subnet Mask, Default Gateway and DNS Server shown in
