Code
Menu
1.
Press or to select
debug
.
2.
Press
.
3.
Point the target device's
remote control at the SRC-
3810 learning eye located at
the bottom of the unit (see
Figure 1: Front View).
4.
Select a device (for example
TV).
The SRC-3810 Touch Screen sequentially displays screens
corresponding to first the hard keys, then page one of the
soft keys, and finally page two of the soft keys. The blinking
rectangle denotes the key being learned.
5.
Press the corresponding
button of the target device's
remote control.
The SRC-3810 screen displays
an
OK
message if the code
was successfully learned .
Press to toggle between
hard key and soft key
displays.
6.
Press or to exit debug
mode.
23
