Code
Menu
Learning from Another Remote Control
Before using learning mode, set both remotes on a flat
surface so that the device’s remote control IR is
pointed at the SRC-3810’s learning eye, which is
located at the bottom of the unit.
1.
Press or to select
Learn
.
2.
Press
.
3.
Point the target device's
remote control at the SRC-
3810 learning eye located at
the base of the unit (see
Figure 1: Front View).
4.
Press the button
corresponding to the target
device.
The SRC-3810 Touch Screen sequentially displays screens
corresponding to first the hard keys, then page one of the
soft keys, and finally page two of the soft keys. The blinking
rectangle denotes the key being learned.
5.
Press the corresponding
button of the target device's
remote control.
The SRC-3810 screen displays
an
OK
message if the code
was successfully learned or
an
ERROR
message if the
code was not learned.
Press to toggle between
hard and soft key displays.
Note:
When the remote has
learned the last button on the
page, the next page is
automatically displayed.
6. Press to exit learning mode.
19
