12
Copyright © 2009 Suntrap Pty Ltd All rights reserved ABN 87 117 052 856
6. Completed installation views of assembled parts
Solar Control Kit – solar pump and Solar Control Unit
Also shows shut-off ball valve fitted P/n SOV00A
Cold Water Inlet - and Tank temperature sensor
receptacle (Points H and U)
Solar collector outlet assembly consisting of the Air Vent
assembly, solar collector temperature sensor receptacle and
a ½”M x ½” CTI Conetite union to join to 15 mm pipe (Point K)
Solar collector inlet assembly, including the Expansion
Control Valve and the ½”M x ½” CTI Conetite
union to join to 15 mm pipe (Point L)
Part/n SCU20A and SOV00A
Part/n CWI20A (H) and BSR00A (U)
Part/n SWR00A
L
Part/n SWI00A
K
U
H
L
K
850kpa Pressure and Temperature Relief valve (point J)
Solar return inlet - non-return valve with the purge
valve assembly (point G)
Showing both the Pressure and Temperature Relief valve
(Point J) and solar hot water out connections (points F, S)
(Electric Boost) (Point T is cold water in to Tempering Valve)
Coupling between the solar collectors (Points M and N)
(Note: actual model may vary)
Part/n FCS002, FCS003
Part/n PTR850
Part/n NRV00A
Part/n SHW00E (Point F),TEMP01, PTR850 and Blanking Plug (V)
J
Please note that on Gas Tanks the connections
F and J are swapped over)
M and N
S
J
F
T
V
G
R
