Suntor ST5XHPT, User Manual

Page: 8 / 12

8th
3. How to connect with fly control System
On board
If your Auto pilot system is TTL interface for data. You
can use the TTL cable to connect the transmitter’s S1
port with auto pilot system.
If your auto pilot system is RS232 interface for
data, with the cable’s definition, you can make a
RS232 cable to do the connection with your auto
pilot system.
On Ground
For Receiver, to connect with GCS
you can use the TTL to USB cable.
4. Antenna Interface
SAM internal thread female
V. Operating Instructions & Steps
1. Make TX and RX and
accessories ready.
Besides the whole equipment we
supply, you also need to make
sure the video source, display
and power ready before
operating.