Page 37 of 49
4.1
Bridge Security Setting - WEP
This page can be access by clicking “Bridge -> Setting” page.
Figure 19 Bridge Security-WEP Page
1)
Security Mode
select “WEP” to enable the security mode.
2)
Encryption Key
The WEP key is an ASCII string, can be in one of the following formats: 5
characters, 13 characters, or 16 characters.
Note that it is required to have the same security setting between
Bridges to communicate.
3)
Click “Save” and then “Reboot” button when you finish setting up for
parameter changes taking effect.
