Page 23 of 49
after reboot. Note: the password is case sensitive
3)
SNMP Community
SNMP Community name is a string for administrator to read and write the
SNMP MIB from external SNMP manager. The default SNMP community name
is “public” for read community, and “private” for write community. You may
change the community name as your plan. Confirm your setup then clicking
“Save” button to perform.
4)
System Name & Location
The fields of System Name and System Location is the strings for you to
conveniently identify the different unit. The content of the string is empty by
default and can be any ASCII characters with max. length of 255 characters
for both System Name and System Location. Confirm your setup then clicking
“Save” button to perform.
5)
ICMP Echo
The Outdoor WLAN Product normally may respond ping (ICMP Echo) request.
However, the ping response may be disabled for special purposes. Thus, the
PC in this network won't be able to probe the existence of Outdoor WLAN
Product by ping command. The default value is "Enable". Confirm your setup
then clicking “Save” button to perform.
6)
Management VLAN
The system is able to specify a VLAN identification (ID) for all management
packets. The VLAN ID can be 2-4094. And, specify 0 to disable this function.
Confirm your setup then clicking “Save” button to perform.
7)
NTP
The Network Time Protocol (NTP) is a protocol and software implementation
for synchronizing the clocks of computer systems over packet-switched,
variable-latency data networks. The available NTP server IP & its availability
can be found by the following hyperlink (http://www.pool.ntp.org/en/). Enable
this feature and specific the IP address of NTP server IP to get the system
date & time through NTP protocol.
