3rd
7. To directly use the HDMI output of the PTZ camera, connect the PTZ holder after energizing and
self-testing, to avoid damage caused by rotation of the PTZ holder in self-testing to the HDMI cable. To
thoroughly solve this problem, it is preferred to use the split product, that is, the HDMI RX video
encoder board and PTZ camera are integrated with a short distance, and separated from the Ethernet
TX via the 4pin 100Mbps Ethernet cable. In this case, the reliability of HDMI signals between the PTZ
camera and HDMIRX video communication board will be greatly improved.
8. The HDMI cable and antenna may cause interference to GPS. They should be kept far away from the
GPS module and its cables as much as possible in the wiring process.
9.
Do not disassemble or modify SUNTOR ST5/11/30HPT. Any problem during installation, contact
SUNTOR or the sales agent.
10. Keep appropriate distances between electronic devices during installation to minimize electromagnetic
interference.
III. List of in-box items
On board x1
Ground terminal x1
On board antenna x1
Ground antenna x1
4P-to-DC power cable x2
HDMI video cable x1
Network cable x1
TTL Serial port cable x2
USB cable of TTL serial port x1