Suntek HC-300, User Manual

Page: 20 / 28

press MENU to return to info display
Press MENU to cancel setting and return to info
display
4.1.12 Set Video Length
The following shows how to set video length to 30
Seconds, provided that the previous value is 10 Seconds:
a) Press MENU to display the setting menu.
b) Press DOWN to select Video Length
c) Press RIGHT to select 30S.
d) Press OK to save the current setting,
then press MENU to return to info display
Press MENU to cancel setting and exit.
4.1.13 Set Video Sound
The following shows how to turn off the sound of the
video:
a) Press MENU to display the setting menu.
b) Press DOWN to select Voice.
c) Press RIGHT to display the VOICE setting
Interface.
d) Press UP to select “OFF”
e) Press OK to save the current setting, then press
MENU to return to info display.
Press MENU to cancel setting and return to info
display
4.1.14 Set PIR Triggering Interval Time
This parameter means that how long the PIR (Passive
Infrared motion sensor) will be disabled after each
triggering in ON mode. During this time the PIR of
the device will not react to the motion of human (or
animals). The minimum interval is 5 seconds, it means
the PIR works all the time and media is taken almost
continuously. The maximum interval is 30 minutes, it
means the PIR will be disabled for 30 minutes after each
triggering. The default value is 5 seconds.
The following shows how to set PIR Triggering Interval
Time as 1 minute provided that previous option is 5
16
VIDEO LENGTH
VOICE