Suntek HC-300, User Manual

Page: 12 / 28

card slot with angle in the upper left.
3.3 Power on and Enter into the ON Mode
Before switching on, please pay attention to the
following:
1. Avoid temperature and motion disturbances that
could be construed as animals or humans such as trees
that are exposed to direct sunlight for much of the day
or any other heat source. These may cause false triggers
2. The height from ground for placing the camera
should 1 meter with the object. For example for deer
waste height is good size appropriately. In general, one
to two meters are preferred.
Slide the power switch to the ON position (Left) to
power on the camera and enter into the ON mode.
Before entering into the ON mode, you can adjust
the camera the target area by laser pointer. Related
information, please refer to section 4.3.
After switching on the camera, the motion indication
LED (red) will blink for about 20s. The 20s is a buffering
time before automatic capturing photos or videos, e.g.
for closing and locking the bottom cover, fixing the
camera on a tree and walk away.
In ON mode, it is unnecessary to use the remote
control. The camera will take pictures or videos
automatically according to the default settings or
previous custom settings. The camera has the sound
recording function, so the sound will be embedded in
the video clip while capturing a video.
8