Suntek HC-300, User Manual

Page: 19 / 28

a) Press MENU to display the setting menu.
b) Press DOWN to select Resolution.
c) Press RIGHT to select 720P.
d) Press OK to save the current setting, then press
menu to return to info display.
Press MENU to cancel setting and return to info
display.
4.1.10 Set Date and Time
You can change the date and time of the device by
setting this parameter when necessary, e.g., after every
battery change. The date format is day/month/year, the
time format is hour: minute: second. The valid value for
year is between 2010 and 2050.
Provided that the date and time are needed to be set
to November 15th, 2011 and half past ten, the steps are
as following:
a) Press MENU to display the setting menu.
b) Press right button enter into “system”
c) Press DOWN to select Date/Time.
d) Press Right Button to Display Date/Time
Interface, Press UP and DOWN to change the Value
e) Press OK to save all current setting, then press
MENU to return to info display.
Press MENU to cancel setting and return to info
display.
4.1.11 Set Multi
This parameter affects the number of pictures
taken for each triggering in the camera mode. It has
four values: “1 Photo” “3 Photos” and “3 Photos and
9 photos”. Its default value is “1 Photo”. The following
shows how to set photo burst to 3 Photos , provided that
the previous option is 1 Photo:
a) Press MENU to display the setting menu.
b) Press DOWN to select Multi.
c) Press RIGHT to select 3 pictures.
d) Press OK to save the current setting, then
15
Date/Time
Multi