Focus on customized architectural lighting
wwww.suntechleds.com [email protected]
System connection
1
、
The main controller is equipped with sub-controller and signal adaptor. The main control and sub-control
working voltage is AC220V. The working voltage of the signal adaptor is the same as the working voltage of
the pixel light.
2
、
Each sub-controller has 8 ports. The TTL sub-controller can carry 512 (RGB) pixels per port. The DMX
sub-controller can carry 170 (RGB) pixels per port. It is used with the signal adaptor and supports 200
meters long distance transmission.
3
、
The main control and sub-control, sub-control and sub-control are connected by CAT5 twisted cables, the
maximum distance of each section is less than 120 meters; the maximum transmission distance between
the sub-controller and the signal adaptor is less than 120 meters. In this case, the maximum distance from
the signal adaptor to the first pixel light is no more than 2 meters.
4
、
It is recommended that the maximum point spacing should not exceed 2.5 meters, and each intermediate
power supply can support the power supply distance of 6 meters left and right (can be adjusted according to
the project conditions).
Control system
TTL Dual channel real-time
back up
DMX512
Main controller
Sub controller
MR-218A
MR-218DW
Signal adaptor
Signal adaptor
AD-001Differential
Signal adaptor
AD-002Differential
Signal adaptor
Signal cable
Two-core shielded wire
Two-core shielded wire,
Three-core shielded wire
