Focus on customized architectural lighting
wwww.suntechleds.com [email protected]
Frame installation method:
②
installation rubber plug:
Use a suitable rubber plug and hammer the
rubber plug into the hole drilled by the
mounting carrier; (Note: the rubber plug
should not be loose)
③
mounting frame mounting base:
Align the hole of the frame mounting base
with the rubber plug hole and mount it on the
mounting carrier;
⑤
mounting profile cover:
The top cover of the profile with the point
source is installed, aligned with the
mounting base, and fastened to the profile
mounting base;
①
installation carrier drilling:
Drill a hole in the position where the carrier
is required to be drilled by selecting a
suitable drill bit;
④
fixed frame mounting base:
After installing the frame base, lock the
mounting base with screws and do not
loosen it;
⑥
mounting profile reinforcement
screws:
After installing the profile, use two
self-tapping screws from the lower side to
fix the profile cover and the profile
mounting base to prevent the profile
cover from falling.
