Table of Contents
2
Important Safety
pg. 2
PicoCell At-a-Glance
pg. 3
PicoCell Overview
pg. 4
Installation Requirements
pg. 5
Mounting Instructions
pg. 6
Wiring Instructions
pg. 7-8
Operations
pg. 9
Troubleshooting
pg. 10
Important Safety:
Please read and follow these important instructions to help ensure your safety and the quality performance of your Kasco equipment.
This manual contains important instructions that should be followed during installation, operation, and maintenance of the PicoCell
controller.
Carefully read and follow all safety instructions in this manual. Make sure that safety labels are always in good condition and replace
any missing or damaged safety labels.
•
Caution should be used when dealing with any electrical and/or moving equipment.
•
Under NO CIRCUMSTANCE should anyone enter the water with the electrical equipment plugged in and/or in
operation.
Warning
Risk of Electrical Shock
Disconnect Power Before Removing Door Cover
Caution
Risk of Electrical Shock
Before performing any service or maintence inside the controller, or when connecting or disconnecting any wires, DISCONNECT the
power and wait 90 seconds to allow the capacitor bank inside the controller to discharge to a level below 50Vdc.
Do Not:
- Turn on the power to the controller before terminating all wiring connections and closing the cover door.
- Connect power wiring to the controller before mounting the box.
- Service the device if your hands are wet or damp. Always make sure hands are dry before working on the controller.
- Modify inside the controller.
- Remove any parts of the controller unless instructed by this manual.
