10
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
i
When purchasing pellets, ask
for
conformity
declaration
and certificate issued by an
accredited
laboratory
and
make sure the fuel meets the
requirements indicated in the
manual. If you purchase large
amount of pellets (bulk supply
for the entire heating season
for example), ask your supplier
to provde accurate and true
information about the storage
conditions.
We recommend to use pellet with size of
6 - 8mm. Density 600 - 750kg/m
3
heating
value 4.7 - 5.5 kWh/kg. Ash content – less
than 1% and moisture content up to 8%,
EN ISO 17225-2:2014.
The optimal density of the pellets which
guarantees their quality is 605-700 kg per
cubic meter.
Pellet moisture content must not exceed
10%. Make sure you store your fuel in a
dry and well-ventilated place.
The optimal pellet ash content is ≤ 1%.
This also provides for less frequent
cleaning intervals for the burner.
The table below contains the parameters
which we recommend that you take into
consideration when choosing fuel for
your „Pell” burner.
4. TRANSPORTATION OF THE PELLET
BURNER
When loading, transporting and
unloading of the device appropriate
safety equipment must be used in
accordance with Directive 2006/42/SE.
Product must be in original packaging
following the instructions on the label -
to be protected from adverse weather
conditions (snow, rain and dust) from
the shocks, and other activities likely to
cause damage. In case of malfunction
of the fan or the motor drive (noise,
friction) or failure of high-tech elements
such as broken LCD screen, contact your
nearest authorized service center for
repairs and maintenance.
- Dimensions of the packaging of the
burner: 450х350х750 mm
- Dimensions of the packaging of the
auger: 260х120х1700 mm
- Dimensions of the packaging /woody
coffer/ of the burner (
modell Pell 150
):
865х435х630 mm
5. DELIVERY OF THE PELLET BURNER
• Inspect the integrity of the packaging
upon delivery.
• Check whether all components
have been delivered to you. Burner
consignment
package
includes
(diagram 3):
1) Pellet Burner Pell with built-up
Control unit
2) Feeding chute
3) Fire irons
4) Auger
5) Technical passport. Installation and
operation manual
6) Service booklet and Warranty card
If any of the above items are missing,
contact your supplier.
