4
2.1. Symbols
This symbol indicates information that, if ignored, could result possibly
in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly result
in personal injury or physical damage due to incorrect handling.
Indicates information considered important, but not hazard-related.
2.2. Safety Instructions
Be sure to read this manual thoroughly before installation.
Do not attempt to install the inverter by yourself. Installation work must be performed
following national wiring standards by authorised personnel only. Do not turn on the
power until all installation work is complete.
Do not disassemble the inverter. If you need repair or maintenance, contact a
professional service centre.
Always use an individual power supply line protected by a circuit breaker and
operating on all wires with a distance between contacts of at least 3mm for this unit.
The unit must be correctly grounded and the supply line must be equipped with a
suitable breaker and RCD to protect people.
Disconnect all wires before performing any maintenace or clearning to reduce the
risk of electric shock.
The unit is not explosion-proof, so it should not be installed in an explosive
atmosphere.
Never touch electrical components immediately after the power supply has been
turned off since the system can still have residual energy, so electric shock may
occur. Therefore, after turning off the power, always wait 5 minutes before touching
electrical components.
This unit contains no user-serviceable parts. Always consult an authorised
contractor for repairs.
WARNING
CAUTION
NOTICE
HIGH LIFE RISK DUE TO FIRE OR ELECTROCUTION.
The Sunsynk Hybrid Inverter can only be installed by a qualified licensed
electrical contractor. This is not a DIY product.
WARNING
