Description
Water inlet from pump to filter
Water outlet from filter to pond
Cleaning outlet from filter to sewerage or flower bed
Our pressure filters are an ideal and easy filter system for your garden pond. Compared to commonly
used filter systems, our filters dispose of various advantages:
large cleaning capacity,
combined mechanical and biological filtering (depending on the model),
effective filter materials,
integrated UVC unity as well as waste display,
remains waterproof even at high pressure,
water delivery up to 3 m in height (depending on the capacity of the pump connected),
easy installation and maintenance of the filter.
Pressure filter functions
Our pressure filter purifies the water in 3 stages:
1. The first stage is mechanical. The visible dirt particles are removed by 3 layers of filter
sponges arranged from coarse to fine.
2. The second stage is biological. By means of so-called bio balls (depending on the model), the
accumulation of bio-organisms is stimulated. These microorganisms remove organic compon-
ents from the pond water (depending on the model).
3. The third stage consists of a UVC treatment of the water. The UVC light destroys algae and
germs. The result: healthy, clean water.
Pressure filter installation
1. Place the pressure filter so that it is not flooded or does not fall
into the pond; it should be in a distance of at least 2 m from
the pond edge.
2. Make sure that it is placed on an even surface.
3. To simplify the pressure filter handling, make sure that you
can easily reach the opening.
4. The water outlet back to the pond should be 2 m at most
above the filter lid (0.2 bar of water pressure).
5. The pump should be turned on first.
© by WilTec Wildanger Technik GmbH
Item 51187
Page 6
http://www.WilTec.de
http://www.aoyue.eu
04 2021
-1
