20
6) Cleaning the machine
After each daily operation, clean the sewing machine to
remove any dust or thread pieces left.
Open bed cover (left), bed front cover or other covers for
cleaning. You may also use air guns.
Take out the backside rubber cap of the bed
①
at the back of
the sewing machine. Clean out dust or any residues in the oil
net with a tweezer or an air gun once a week.
5) Cleaning the oil filter
Oil will not supply smoothly if dust gets built up in oil filter
①
. Check the oil filter once every six months.
Check the oil filter through the oil window if there is no or
only little amount of oil being supplied.
Before checking the oil filter, remove the oil filter cover
②
.
Clean dust build-ups inside the oil filter.
When removing the oil filter cover, be sure to prevent the remaining oil in the oil filter from
leaking.
Caution
When using an air gun, be cautious to
prevent the gathering of dust and thread
cuts around parts.
Caution
Do not loosen the fixing screw
②
for the
location bushing on the needle plate
attachment base.
Caution
[ Figure 23 ]
[ Figure 22 ]
①
②
[ Figure 24 ]
②
