8
Specification
Size
530(W) x 340(D) x 370(H)
Weight
Motor Power
Motor Speed
39kg
200W~400W
1000rpm~1200rpm
1
Machine Installation
2
Warning
▶
The machine must be installed by a trained technician.
▶
For electrical wiring, consult the dealer where you purchased the machine or qualified
technician.
▶
Two or more people should install the machine since the machine weighs over 39kg.
▶
Do not plug in until the installation is complete.
You may step on the pedal by mistake and operate the machine causing physical injuries.
▶
Connect the ground (earth) wire.
An unstable connection may cause electric shock or malfunction.
▶
Mount the belt cover on the machine.
▶
Use both hands when leaning the machine backwards or returning it to its up-right position. If
you perform with one hand, your hand may slip and get caught between objects due to the
machine’s heavy weight, resulting in injury.
1) Machine Installation
Install the machine on the table with the hinge, hinge bar,
wooden screws. Leave 150mm space from the table to the
bottom tip of the knife to collect dust particles.
2) Motor Installation
(1) Use 200W~400W motor.
(2) Use A-type, V-motor pulley of 50~60mm in diameter.
Mount A-type, V-belt around the machine pulley and
motor pulley.
(3) The motor is installed correctly if the motor pulley is in
parallel line with the machine pulley and the distance
between the two pulleys is over 300mm.
3) Rotation Direction
The rotation direction of the machine pulley should be
clockwise when seen from the right hand side of the
machine, as in Figure 1.
[Figure 1]
