manualshive.com logo in svg

SunStar KM-1957-7, User Manual

Share
Download
SunStar KM-1957-7 User Manual Download Page 27

27

4) Thread Take-up Spring Tension Adjustment 

(1) Operating range of thread take-up spring  

As shown in figure 36, if you loosen the screw

①

and turn the thread take-up spring stopper

②

clockwise, the operating

range of thread take-up spring would decrease. If you turn the thread take-up spring stopper

②

counterclockwise, the

operating range of thread take-up spring would increase. The standard operating range is 5~10mm.  

(2) Thread take-up spring tension adjustment  

As shown in figure 37, if you loosen the shaft screw

①

of thread tension control and turn it clockwise with the drive on the

thread tension control shaft groove, the tension of thread take-up spring would strengthen. If you turn it counterclockwise,
the tension would weaken. The standard tension of the thread take-up spring is 50~80g.

5) Operation of thread adjusting device

The main and supplementary thread adjusting devices

①

,

②

are automatically in operation.  

※

The tension of the main/sub thread tension control

device is cleared when lifting the thread trimmer or

presser foot and the sub thread tension control

device

②

is available to ON/OFF of the function

switch

③

.   

[ Figure 36 ]

[ Figure 38 ]

[ Figure 37 ]

①

②

①

①

②

③

Summary of Contents for KM-1957-7












































Reviews:

No comments

Brands by name

Popular brands

Load more brands