manualshive.com logo in svg

SunStar KM-1957-7, User Manual

Share
Download
SunStar KM-1957-7 User Manual Download Page 13

13

4-5. Installing body of sewing machine

1. Hinge Rubber

1) As in the figure, assemble two-hinge rubbers 

①

on the

table.

2) As in the figure, fix the hinge rubbers with nails 

②

.

3) Insert a bed support rubber

③

into a table and fix it by

hammering a nail

②

.

2. Pedal switch and connecting rod

1) Join two head hinges

①

completely with the rear hole of

the sewing machine bed.  

2) Assemble the head hinge

①

into the fixed holder

③

to the

head hinge rubber

②

of table and put down the body of

sewing machine on the bed support rubber

③

. 

Please insert completely the support rod

④

of the body

into the table, if not, there is concern about the safety
accident due to shaking of the rod when bending the
body of sewing machine backwards. 

3. Oil Pan

1) Fix the twice inclined side of oil pan

①

to the

undersurface of table

②

with six nails making the inclined

side toward the worker.  

[ Figure 6 ]

[ Figure 7 ]

[ Figure 8 ]

①

①

②

④

③

②

②

②

②

①

③

③

①

②

③

①

②

Summary of Contents for KM-1957-7












































Reviews:

No comments

Brands by name

Popular brands

Load more brands