SunStar Fortuna series, User Manual, Page: 24 / 86

25
How to use detailed functions of product counter and bobbin counter
A. How to use the detailed functions of product counter
To use the counter function, set the detailed functions beforehand.
Set the parameter to select the type of product counter
1: Up counter
0: Down Counter
The default value is set at 1 .
B-36
Press the counter button to set the counter function. Press the button to check and
set the detailed data of the counter.
Cn: The current counter amount
rn: The remaining amount
%: The progress
tn: Total target amount (Default: 100)
Press button repeatedly to see the above detailed data in order. The user may
set up the current counter amount (Cn) and the total target amount (tn) as desired.
After the total target amount is set, use and to set the movements.
<Set value of B-37>
0: When work is finished, the buzzer will go off and sewing may begin
1: When work is finished, the buzzer will go off and sewing may begin only when
the button is pressed
2: When work is finished, the buzzer will not go off and sewing may begin
< Set value of B-38>
0: No returning to automatic initial value when counting is complete
1: Returning to automatic initial value when counting is complete
B-38
B-37
To use the product counter function, first set the value of the parameter
(group B, item 35) as desired.
0: Set the external counter switch on
1: Set the automatic counter on after trimming
As the default value is set 0 , the counter will not run if there is no external counter
switch.
B-35
<The current amount>
<The remaining amount>
<The progress>
<Total target amount>
[ Caution ]
When B-38 is set at
“
0
”
, the value will keep on going up/down even when counting is complete. The user will need to re-set the
value of Cn to restart.