Notes:
If the indicator light on its cover appears green and flickering, your projector is in
normal mode. If you don’t want the green light flicker, press Nor/Eco to enter
economic mode.
As for minor defects on the screen such as red, green or blue ones, it will never
influence the performance of display.
At present, digital TV signal in China hasn’t unified and needs Set Top Box. The
operating mode of analog TV is to connect antenna of cable TV to TV port of
projector. Use power wire to connect power and projector and hen press power
switch. Press SOURCE on the cover or remote control to select TV option. Due to
different TV signal in different regions, you have to set when connecting cable TV
for the first time.
When connecting the computer, use D-USB (VGA) wire to connect VGA output
plughole and VGA interface of the projector.
Connect power to the projector and press the power to open it. Select VGA option
from MENU on keyboard plate or Source on the remote control. Caution: before
operating the abovementioned procedures, you need to turn on your computer,
set its resolution ratio as 1280*768 and refresh rate as 60 HZ and then notice
whether your video card support dual display.
Summary of Contents for PH58
