12
TEMPERATURE SETTING:
The temperature settings on this barbecue are labeled high (or ON) to low
flame and the control knob can be set any where in this temperature range on
all burners. To pre-heat this unit, close the lid and monitor the thermometer
located on the lid. Once pre-heated open lid to avoid overheating, unless
roasting.
CLEANING AND MAINTAINANCE
The HORIZON gas barbecue is designed to withstand the high temperatures
under normal operating conditions. Never scrape or scratch the hot painted
surfaces. Never dose the hot surfaces with water. If there is any excess fat or
grease, it is best removed while the barbecue is still warm.
COOKING SURFACES:
The cooking grills have been porcelain enameled for
durability and ease of cleaning. These grills may be cleaned with a normal
NON abrasive household cleaning solution designed for kitchen use.
PORCELAIN ENAMEL CASTINGS:
Periodic cleaning with a dry or damp
cloth or soft brush will keep porcelain enamel surfaces looking new. To clean,
soak in warm water and use only a kitchen appliance cleaner or a polish
designed for use on porcelain enamel surfaces.
DO NOT USE ABRASIVE CLEANERS ON THE PORCELAIN ENAMEL
FINISHES AS THIS WILL PERMANENTLY SCRATCH THESE SURFACES
BURNERS:
Periodically inspect the burners blockage or corrosion. These can
be cleaned with a small piece of wire and a wire brush. Ensure that the
aeration screw is secure and that it is set properly.
HOSE:
If the hose shows signs of deterioration or damage, use a soap water
solution to test the entire outer surface of the hose while under pressure
checking for bubbles, (this would indicate a leak in the hose). Replace the
hose at the first sign of a leak or if age cracking becomes apparent.
Remember to turn the gas off before removing the hose.
Off is
straight up
To ignite,
push the
knob in and
turn counter
clockwise
Keep turning
to reach the
low position