background image

Properly Securing Child

 

WARNING:

Serious injury or death can result if child is not

properly secured in restraint.

Confirm harness is snug* before each use and after

making any restraint adjustments.
1. Confirm proper restraint installation
2. To loosen harness: lift                                     

harness adjuster and pull                                   

shoulder straps forward                                  

(Fig. 1)

3. Unfasten harness clip

     and harness buckle, and

   move harness straps to 

               

the sides.

4. Place child in restraint.
5. Position harness straps around child and fasten

buckle and harness clip. (Figs. 2 & 3) 

Confirm harness clip and buckle are properly fastened

by gently tugging on each.
6. Gently pull harness straps upward to snugly fit 

lap portion of harness which should fit low on 

child’s body, across the hips.

7. Slowly pull adjuster strap

     downward to tighten

     harness for a comfortable

     and snug fit around child.

     (Fig. 4)

* A snug harness strap                                     

should not allow any                                      

slack. It lies in a relatively                                  

straight line without                                          

sagging. It does not press on the child’s flesh or

     push the child’s body into an unnatural position.

32

Summary of Contents for Radian 65













































Reviews: