SUNSET SKYCLOUD MAXI, Assembly Instructions Manual

Page: 29 / 36

Matching Zone operation for R G B color remote controller
Step 1: Connection to load to the receiver and power on it.
(If the receiver was coded before, clear the code first.)
Step 2: Select area (Select the area with the ZONE key and
the corresponding indicator lights up)
Step 3: Press and hold ON on the remote control for 5 seconds,
the indicator of the remote control will flash quickly, means it enters
the pairing code transmission.
(Will automatically exit code transmission status after 60 second,
or pressing any key to exit.
Step 4: See the load light flashes 3 times and return to the intial state.
(Pairing coding is finished succesfully)
SET
Matching Zone operation for R G B color remote controller
Step 1: Connection to load to the receiver and power on it.
(The clearing operation should be finished within
1 minute after the receiver is powered on.
If exceeds the time, can be powered on again.)
Step 2: Press and hold the remote control ‘OFF’ for 5 seconds.
The indicator of the remote control flashes quickly,
means it enters the clearing code transmission status.
There is no need to select the corresponding area when clearing code.
(Will automatically exit code transmission status after
60 seconds of pressing any key to exit.If the original remote controller is lost,
the new remote controller can be used for clearing operations.)
Step 3: See the load light flashes 3 times return to the intial state.
(Clearing coding is finished succesfully)
CLEAR
Electrical Steps Electrical Steps