Sunset Healthcare NEB402 Instruction Manual Download Page 8

Green light flashes

Green light flashes 3 times
Green light flashes 5 times
Green light flashes 10 times

The battery group can supply power up to 60 minutes continually after 

full charging.

When the battery power is below 3.8V, the green LED light will keep 

flashing, until the nebulizer powers off automatically. When low power is 

indicated, please recharge the battery for 1.5 hours. During charging, the 

green LED light flashes. When charging completes, the green LED light 

will display solid. When the device is working, the blue LED light will 

display solid.

8

6.2 Battery Charging 

Note:

We recommend charging the device every 2 days to ensure normal use. 

Continue charging the device at least once per month when not in use for 

more than one month.

The rechargeable battery should not be replaced by the user, only by the 

manufacturer.

The device cannot work when charging. 

Step One:

Please refer to the Section 7 to do the Cleaning & Disinfection.

Step Two:

Open the medication cover and fill the medication cup with liquid medication. 

Please see the Figure 4 Filling Procedure for reference.

Warning:

Please dispose of the device with the used batteries according to the  local 

environmental regulation.

6.3 Use Instructions

The light indicates the summary form

Green light displays solid

Working
No liquid, shut down
Battery low, shut down
Set time for 10 minutes, 

shut down 
Charging

Green light displays solid

Fully charged

Summary of Contents for NEB402





























Reviews: