a. Remove the mask or mouthpiece from the main unit.
b. Pour a small amount of clean water into the medication cup and
When finishing nebulization, press ON/OFF switch to power off. Pour out the
residual liquid medication from the medication cup. Please see Figure 7 below.
Clean after use:
Clean and disinfect the main unit, medication cover, medication cup and mask or
mouthpiece by the method detailed in Section 7 (Please refer to the Section 7
Cleaning & Disinfection).
Before and after use, be sure to clean and disinfect the main unit, medication cover,
medication cup and mask or mouthpiece. We recommend one device be used and
reused for a single person. The device is not provided sterile.
10
Step Four:
Figure 7 Pouring out the Residual Liquid Medication
Step Five:
Note:
a.Please keep the device vertical and do not shake during the operation.
b.Holding inhaled breath for a short while can enhance the effectiveness of
nebulization therapy.
c.The medication liquid will sometimes congeal on spray connector and mesh
disc, which will influence the nebulization rate. We recommended stopping
nebulization, removing mask or mouthpiece, and using clean medical gauze
to clean the residue.
d. Please contact manufacturer with any additional questions for use.
7. Cleaning & Disinfection
7.1 Cleaning
PRESS Button
