close the medication cover. Soak the medication cup for 5 minutes.
c.Turn on the device to nebulize the clean water for 1 to 2 minutes to remove
residual medication from the mesh.
d.Turn off the device and disassemble the medication cover and medication cup
from the main unit.
e. Please clean the casing of the main unit by moistening a clean medical gauze
with clean water and immediately drying using clean medical gauze. Also clean
the electrodes with clean medical gauze.
f. Please rinse the mask or mouthpiece, medication cover and medication cup
with clean water for at least 5 minutes.
g. Please use clean medical gauze to dry after rinsing.
h. Please store the device in a clean and dry storage environment.
The waterproof classification of main unit is IP22, it cannot be washed. Prevent
water from entering unit.
Following the cleaning instructions after each use will prevent any remaining
medication in the bottle from drying, adhering to the mesh cap, and resulting
in the device not nebulizing effectively.
Please don't use the disinfectant of benzalkonium bromide or house bleach.
Never use Sodium hypochlorite, Hypochlorous acid or quaternary ammonium
compound to disinfect.
After cleaning, the components — medication cover, medication cup, and mask
or mouthpiece — should be disinfected as the instruction below:
a. Lift open the medication cover and pour a small amount of 2% hydrogen
peroxide solution into the medication cup.
b. Turn on the device to nebulize the 2% hydrogen peroxide solution for 1 to 2
minutes.
c. Please soak the components listed in solution of 2% hydrogen peroxide for
10 minutes at 68
℉
(20
℃
);
d. Please rinse with distilled water for at least 5 minutes.
e. Please dry with clean medical gauze gently.
f. Please assemble the device.
g. Please store the device in a clean and dry storage environment.
11
Note:
7.2 Disinfection
Note:
