Sunset Healthcare NEB401, Instruction Manual

Page: 8 / 22

10
11
Picture 3 Nebulizer Assembly
Picture 4 Add Liquid Medicine
2. Nebulizer Assembly
(1) Please clean and disinfect nebulizer before first using and after each using, then
dry it. See Chapter 5 for details.
(2) Use one hand to hold the Main Unit, the other hand to hold the Medicine Cup.
Push the cup along the slot ,until you hear a “Click” sound. (Picture 3 )
(1) Hold the Main Unit and open Medicine Cup clip;
(2) Add medication into the Medicine Cup. Please note: Max volume is 8 ml.
(3) Tighten the Medicine Cup cover.
3. Add medication
If the Medicine Cup isn't assembled in the
right place, the device may not be able to
operate normally.
NOTE !
Picture 5 Mask Assembly and Mouthpiece Assembly
4. Usage of Nebulizer
Nebulizer Accessories are categorized as mouthpiece, adult mask and child mask.
Please choose appropriate accessories according to your needs.
(1) Attach mouthpiece or facemask as see in Picture 5.
(1) After putting medication in, avoid shaking your device, which may cause
leakage of medication.
(2) After charging, make sure you remove the power cable from the device
before using.
(3) Push the power button. The indicator light (Green Light) will light up and the
device will start to work. Put the narrow end of the mouthpiece into the mouth,
lips slightly closed.
Or, hold mask close to face, covering the nose and mouth.
NOTE !