6
3.3 Starting scanning
Tips: 1. How to get a good scan model?
The best way is to use rotating table and lifting table.
Put the target object or person standing on the rotating table, while the scanner fixed
on the lifting table. The scanner will scan the object one time after the rotating table rotate
one circle slowly. Then lift or down the scanner and continue scanning. Normally, you need
scan three times (up, middle and down) for complete body portrait scanning.
During scanning, when the part became white (not green or red), that means the
scanning object offset the original location. You need to move back the original location or
resume a new scan.
Stop Scanning
Green part: scan and rendering finished.
Red part: scan finished, but render not finished
Scan object
or body
Rotating table
scanner
Lifting table
