Quickie Prelude Service Manual Contents
Introduction .................................................... 0.1
VR2 Controller ............................................... 0.2
Plugs/Connectors .......................................... 0.3
Basic Tool List & Main Wiring Diagram ........ 0.4
Section 1
Troubleshooting: No Power ................................ 1
1.1 Circuit Breaker Reset ....................................1
1.2 Test Joystick ..................................................1
1.3 Battery Test ....................................................1
1.4 Battery Connection Test ...............................2
1.5 Circuit Breaker Test ......................................3
1.6 Check Battery Wire Harness ....................... 3
1.6 Main Harness ...............................................4
Section 2
Chair is not Charging ...........................................5
2.1 Not Charging ...............................................5
Section 3
Understanding VR2 Controller Display ................6
3.1 The Speed/Profile Indicator Ripples Up and
Down ...................................................................6
3.2 The Speed Indicator Flashes .......................6
3.3 Battery Gauge is Steady...............................6
3.4 Battery Indicator Ripples up and off. ...........6
3.5 Battery Gauge Blinks Once Every 2.5 Sec-
onds .....................................................................6
3.6 Battery Gauge Flashes Rapidly ...................6
Section 4
Understanding VR2 Controller Diagnostics
Codes ............................................................... 7
4.1 One Bar - Low Battery Voltage ) ................. 7
4.2 Two Bars – Right motor Disconnect / Low
battery voltage ................................................... 7
4.3 Three bars – Right Motor Wiring Trip / Low
battery voltage. .................................................. 8
4.4 Four Bars- Left Motor Disconnected.......... 9
4.5 Five Bars - Left Motor Wiring Trip ............ 10
4.6 Six Bars - Inhibit Active ........................... 10
4.7 Seven Bars - A Joystick Trip is Indicated 10
4.8 Eight Bars - Possible Control System Trip
......................................................................... 10
4.9 Nine Bars - Solenoid Brake Trip ................ 11
4.10 Ten Bars - High Battery Voltage ............. 11
Section 5
Disassembly/Reassembly, and Adjustment .... 12
Step 1 - Seat removal ...................................... 12
Step 2 - Footrest adjustment and removal ..... 13
Step 3 - Shroud removal.................................. 14
Step 4 - Battery removal .................................. 15
Step 5 - Controller removal.............................. 15
Step 6 - Motor removal .................................... 16
Step 7 - Caster Fork removal .......................... 17
Step 8 - Changing Drive Tire ........................... 17