6.1 System not working (No cooling or pump not working)
Whether the power wire is connected to the socket
Whether the power is ready
Whether the power switch on the panel is on
6.2 Pump
not
working
properly
Check water level, whether the pump is pumping water or not.
Check whether the motor of the pump is working
Check whether the recirculation
system
is
blocked
6.3 Pump insufficient pumping
Please check whether the voltage is too low
Please check whether the diameter of the pipe is too small
Please check whether the fluid viscosity
is
too
high
Please check the connection tube carefully
6.4 insufficient cooling or No cooling
Please
check
whether
the
voltage
is
too
high
or
too
low
Please
check
whether
the
air discharge side has been blocked
Please check ambient temp., high ambient temp. will make the compressor halt
for a short time.
6 - Trouble shooting
Warning: For qualified staff only, danger voltage exists after
power on!
LASER CHILLER OPERATORS MANUAL
LASER CHILLER OPERATORS MANUAL
LASER CHILLER OPERATORS MANUAL
5
14
2.4 Dimensions
Note
:
No
filter
Dimensions
Model
PH-LW15-BLP/17A
330
450
600
W(mm)
L(mm)
H(mm)
L
H
W
