22
SSxDSL-5 IDSL Module
U FEBE: This is the number of Far End Block Errors since the
beginning of the test. A FEBE indicates that CRC errors were
detected at the far end.
U NEBE: This is the number of Near End Block Errors since the
beginning of the test. A NEBE is reported when a CRC error is
detected incoming with respect to that interface connector.
For S/T interface testing shown in the right screen of Figure 12
the signal results are:
S/T FRAME ERR: This reports the number of S/T frame errors
since the beginning of the test.
S/T BPV: This reports the number of S/T bipolar violations since
the beginning of the test.
