1. Unbolt bottom collar adapters (Fig. 1, A) from interface plates (Fig. 1,B) and (Fig.
1,C) as shown in Fig. 2.
2. Discard ONE bottom collar adapter (Fig. 2, A).
3. Refer to Fig. 3. Bolt together parts (Fig. 3, A), (Fig. 3, B) and (Fig. 3, C) using bolts
(Fig. 3, D) and washers (Fig. 3, E) being sure to fit them together in the order shown.
Tighten securely.
4. Refer to Fig. 4. Attach swingaway lateral bracket (Fig. 4, A) to the anterior / lateral
interface plate assembly (Fig. 4, B) using bolts (Fig. 4, C) and washers (Fig. 4, D).
Tighten securely. Swingaway lateral mount may be applied left or right or used in
unilateral or bilateral configurations.
5. Refer to Fig. 5. Evenly clamp horizontal ball (Fig. 5, A) between top collar half
(Fig. 5, B) and completed anterior / lateral assembly (Fig. 5, C).
6. See page 19, steps 5-9 for LFC ballrod assembly.
7. See page 17 for Anterior Support Option attachment.
A
Fig. 2
Fig. 3
A
C
B
D
E
Fig. 4
A
B
C
D
Fig. 5
A
C
B
B
C
Fig. 1
A
A
Whitmyer Head Supports
PLUSH Anterior and Lateral Support Combination
23
MKT6100 Rev. C
