background image

Quickie

®

 SEDEO

®

 LITE

252852 Rev. C

9

4.0 WARNINGS FOR COMPONENTS AND OPTIONS

4.11 Power seating safety

DANGER!

1. 

Operation

a. 

While driving this seating system in the elevated or tilted 

 

position use caution.

b. 

Do not attempt to operate any power seating option while 

 

positioned on an incline.

c. 

Do not attempt to operate any power seating option while this 

 

seating system is in motion.

d. 

Do not attempt to operate the lift or tilt power seating options 

 

around children. 

e. 

Through programming it is possible to reverse the direction of all 

 

powered seating functions. Ensure you know which direction your 

 

seat is going to move before operating. Please discuss with your 

 

Sunrise Medical authorized dealer which direction the power 

 

seating functions have been programmed.

2. 

Reduced Speed Driving (Creep and/or C-Me)

This power system is designed to automatically reduce the maximum 
driving speed to a creep and/or C-Me mode when certain power seating 
limits a

re reached. Depending on the confi guration of the chair there 

might be multiple creep and/or C-Me speeds. Please discuss the multiple 
creep and/or C-Me speeds with your Sunrise Medical authorized dealer.

Before operating your chair in creep and/or C-Me mode, read all 
warnings and guidelines related to this feature. They will help in 
understanding how to reduce the risk of a fall or tip-over and how to 
identify environmental conditions that could aff ect your safety when 
driving while the chair is in creep and/or C-Me speed.
a. 

When driving indoors or outdoors, in creep mode, it should only 

 

be used on fl at, level, and hardscape surfaces. 

b. 

Driving in creep mode should never be attempted on uneven 

 

terrain like: gravel, grass, bumpy surfaces, uneven sidewalks, or 

 

hills.

c. 

This feature may be equipped with a system that allows the 

 

power chair to drive up to 3 mph when the seat is elevated. This 

 

feature is called C-Me.

d. 

NEVER raise the seat when the chair is being operated in the 

 

proximity of any of the terrain types listed above, or on any 

 

uneven surface.

3. 

Pinch points

Pinch points may occur when operating the powered seating options on 
this system. Ensure all hands and body parts are clear of all power 
seating components that may result in pinch points before operating 
them.

4. 

Tilting power base with push handles

Do not attempt to tilt power wheelchairs by pulling down on the push 
handles. Power wheelchairs have heavy bases. As such, attempting to tilt 
a power seating system to traverse obstacles can damage components in 
the seating system and/or modular actuators.

5. 

Remain clear during power accessory operation

Please stay clear of any powered actuator while the component is in 
motion. Sunrise Medical power mechanisms move over large ranges of 
travel. Users should be aware of their surroundings while components 
are in motion.

6. 

Maximum user weight

Do not exceed the weight c

apacity for your specifi c system/seating 

system confi guration. Doing so could result in premature failure or injury.

7. 

Latch mode

Use caution while operating any power seating function in latched mode. 
In latch mode, powered seating will not stop until a reverse command is 
performed or the end of travel is met. Please consult with your Sunrise 
Medical authorized dealer to receive training before using latch mode. 
Failure to do so may result in potential serious injury.

4.12 Power leg rest

DANGER!

The power leg rest accessory has a maximum user weight capacity of up to 
350 lbs (158 kg) depending on your system confi guration. Never exceed this 
capacity while operating the powered actuator.

4.13 Lift or Tilt

DANGER!

Pinch Point

Avoid putting hands, fi ngers, clothing items, or letting children near the 
seating system when the Tilt/Lift mechanism is in operation.

Lift or Tilt Weight Capacity

The powered lift or tilt modular accessory for this system has a maximum user 
weight of up to 300 lbs (136 kg), 350 lbs (158 kg) for heavy duty tilt. Never 
exceed this capacity while operating the powered actuator.

4.14 C-Me

®

 Lift

DANGER!

The C-ME accessory has a maximum user weight capacity of 300 lbs (136 kg) 
with a maximum speed of 3 mph at full lift. Never exceed this capacity while 
operating the lift.

WARNING!

Exceeding these weight capacities could lead to injury and/or permanent 
damage to the equipment.
Note: Exceeding the weight limit will void the warranty.

4.15 Swing away joystick arm

DANGER!

Before adjusting the swing away arm, switch off  the controller to avoid 
accidental displacement of the joystick which would cause unwanted 
movement of your wheelchair. Be aware that the width of your chair may have 
increased and you may not be able to go through certain obstacles.

DANGER!

1. 

Only operate the wheelchair at a low and maneuverable speed when the 
parallel swing-away is in use. (Fig. 4.1)

2. 

When transferring to and from the wheelchair, do not use the remote as 
a means of support.

3. 

Do not hang any items on or over the parallel swing-away remote 
assembly as this could damage the swing-away mechanism.

Note: hanging items on/near the joystick may cause unwanted movement and 
potential of serious injury or death!

Fig. 4.1

Summary of Contents for QUICKIE Sedeo Lite

































Reviews: