Sunrise Medical QUICKIE Sedeo Lite, Owner'S Manual

Page: 13 / 32

Quickie
®
SEDEO
®
LITE
252852 Rev. C 13
5.0 SETTING UP THE SEATING SYSTEM
5.4 Pre-set Flip back armrests
Armrest height
Fine or gross adjustments is a two-part process:
Part 1 (Fig. 5.10)
1. Turn (A) in order to adjust (B)
Part 2 (Fig. 5.11)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A).
Armrest pad depth (Fig. 5.12)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A).
Note: In order to reach the rear screw in lower armrest heights, loosen screws (A) of Fig. 5.11 and adjust
the angle of the pad fi rst.
DANGER/WARNING!
All screws should be checked periodically for tightness. A loose arm pad could slip down when pressed.
5.5 Pre-set single post armrests
Armrest height (Fig. 5.13)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A).
Armrest depth (Fig. 5.14)
1. Loosen (A) by one turn.
2. Loosen (B).
3. Adjust (C) to the desired position.
4. Tighten (A) and (B).
Fig.5.11
Fig.5.13
Fig.5.14
Fig.5.12
Fig.5.10