20
RX/RXS
Issue 5
Chair features
Fig. 18
Wheel locks
High mount push-to-lock wheel
locks are shown in Fig. 18. The
wheel lock mounts on a clamping
system (1) and is correctly set prior
to leaving the factory. To apply the
wheel lock simply push the
operating lever (2) forwards until
you feel it go over centre, and the
grip bar (3) grips the tyre (4). The
operating lever (2) can have a
detatchable extension which can
be removed to create space for
side transfers. When the wheel lock
is applied remove the operating
lever extension by pulling it off the
brake. Refit when you are
reseated. It is attatched by a cord
to the wheel lock and cannot fall
off.
2
4
1
3
Warning:
Wheel locks are not brakes and
they are not designed to slow down
the chair when it is moving. Wheel
locks, prevent the rear wheels from
turning when the chair is stationary.
Fig. 19B
Fig. 19
4
3
1
2
Scissor wheel lock
Scissor wheel locks are shown in
Fig. 19. The locks mount on clamping
systems (1) and are correctly set prior to
leaving the factory. To apply the wheel
lock pull the operating lever (2) forwards
until you feel it go over centre, and the
grip arm (3) grips the tyre (4). Scissor
locks can also be mounted on the lower
frame tube (Fig. 19B). When mounted in
the lower position the left hand lock must
be mounted on top of the right hand
frame, and vice versa.
Summary of Contents for Quickie RX
Page 1: ...Owner s Manual RX RXS...
Page 2: ...47 RX RXS Issue 5...