35
Q700M Rev.A
1
A
Removal of motor hub
Preparation
Note!
Switch off the wheelchair via remote control
Instructions
Note!
Suitable work area required!
•
Follow the illustrated instruction for removing the motor
hub from the base of the wheelchair.
•
Rebuild the wheelchair in reverse order once completed.
•
In order to complete this, you must first remove the drive
wheel
Tools used
19
Fig. 6.2.46
1.
Unscrew and remove nut (A) and washer
Tightening torque for (A) bolts is 60Nm.
Fig. 6.2.47
2.
Using the gear puller, pull the hub (B) away from the tapered
shaft of the motor
Fig. 6.2.48
3.
Remove motor hub (B)
NOTE: When refitting motor hub, please slide motor hub onto motor
shaft aligning the key way, fit washer and nut and then tighten
2
B
3
B
Fig. 6.2.46
Fig. 6.2.47
Fig. 6.2.48
Summary of Contents for Quickie Q700-UP F
