Fig. 2.2
Fig. 2.1
2.0 Safety
Follow the instructions carefully next to these warning symbols! Not paying
careful attention to these instructions could result in physical injury or
damage to the wheelchair or the environment. Where ver possible, safety
information is provided in the relevant chapter.
2.1 Symbols and labels used on the product
The signs, symbols and instructions affixed to the wheelchair comprise part
of the safety facilities. They must never be covered or removed. They must
remain present and clearly legible throughout the entire lifespan of the
wheelchair.
Replace or repair all illegible or damaged signs, symbols and instructions
immediately. Please contact your authorized dealer for assistance.
Fig. 2.1: Transit fixation point.
Fig. 2.2: Warning – Danger of finger entrapment (pinch point).
Fig. 2.3: Warning – Maximum user weight for the wheelchair.
Fig. 2.4: Location of Motor Serial Number Label.
Fig. 2.5: Warning – Hot Label on Motor .
2.2 Safety: Temperature
WARNING!
•
•
Avoid physical contact with the wheelchair’s motors at all times. Motors
are continuously in motion during use and can reach high temperatures.
After use, the motors will cool down slowly. Physical contact could cause
burns. Allow the motors after using at least 30 min. to cool down.
If you do not use the wheelchair, ensure that it is not exposed to direct
sunlight for lengthy periods of time. Certain parts of the wheelchair, such
as the seat, the back and the armrests can become hot if they have been
exposed to full sunlight for too long. This may cause burns or allergic
reactions to the skin.
Fig. 2.3
Fig. 2.4
DDMMYY
Q500M/Q400M General Manual
5
248035
Rev.
G
Fig. 2.
5