If you use multiple receivers, you have two choices:
Option 1: have all the receivers in the same zone, like zone 1
Learning
Key
RF LED Receiver
Zone 1
Option 2: have each receiver in a different zone, like zone 1, 2, 3 or 4
Zone 1
Zone 2
Zone 3
RF remote
RF remote
Learning
Key
RF LED Receiver
Learning
Key
RF LED Receiver
Learning
Key
RF LED Receiver
Learning
Key
RF LED Receiver
Built-in 10 color changing modes are as follows:
Mode 1: Any two colors of RGB mix fade-in & fade-out
Mode 2: RGB three colors mix fade-in & fade-out
Mode 3: RGB three colors mix fade-out & fade-in
Mode 4: RGB flash
Mode 5: RGB three colors fade-in & fade-out successively
Mode 6: RGB three colors fade-in successively
Mode 7: RGB three colors fade-out successively
Mode 8: RGB three colors jump changing successively
Mode 9: R&B two colors mix fade (R in B out), then G fade-in, then R&B mix fade (R out B in), then G fade-out
Mode 10: B fade-out, then G&B mix fade (G out B in), then R&G mix fade (R out G in), then R fade-in
How to stop running mode of single color LED light caused by RGBW sender interference:
1. When pairing single color LED light to a single color remote, it might be interfered and paired by nearby
RGBW senders, which might control the single color light into running mode. The running mode can not be
stopped by the paired single color remote or by delete pairing.
2. Then we need this remote, and pair the remote to the receiver via above “
Pair with RF receiver(Method 2)
”,
then touch the color wheel to stop the running mode.
3. Then delete pairing and pair the receiver to the single color remote again, it can be controlled by the remote
again.
