-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
27
SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD.
UFO 3 INSTALLATION (2019.12.23) V1
Maintenance
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING
：
1.
Turn the power off before maintaining or cleaning unit in case the power from
being accidentally switched.
2.
Any fan component replacement, removal or disconnection of a safety device, all
safety device must be reinstalled as formerly setting.
3.
Please schedule annual maintenance or take few minute per week to ensure the
fan’s safety and efficient operation.
4.
Ensure the fan spin direction is proper, the HVLS fan should rotate in a
counterclockwise direction (Looking up from the ground).
5.
Please use a gentle cleaner or degreasing agent when dusting the motor. DO NOT
use chlorine-based cleaning products in case the toxic/fatal fumes exposure.
6.
Check all the connections such as safety cables, mounting parts is tighten. Also
make sure the mounting system is securely tighten. Any wobbling problems
should not happen when you switch on the fan. If any wobbling problem is noticed,
make sure the mounting structure is strong enough to support the fan and the guy
wire, make sure you used and tighten your guy wires, if the wires were not installed,
SUNON suggests you to do the wire installation, please contact Customer Service if
wobbling persists.
7.
If the screws are loosened during maintenance, please re-apply the anaerobic
adhesive.
8.
If you have any questions, please contact Customer Service.
WARNING – Please DON’T use the damaged or lacking fan components, please contact
Customer Service.
