ASSEMBLY INSTRUCTIONS
* Please keep these owner's manual for future reference.
*If you have opened the carton and removed all packages, please disregard the STEP 1 and 2. See the STEP 3
directly.
STEP 1. (1)
Open the carton and turn it upside down, make sure the 4
STEP 2. (1)
Turn the firebowl heads up on a flat ground.
pieces of the carton being open up.
(2)
Lift off the carton carefully and be wary of the accessories inside
falling away.
(2)
Remove all the paper honeycomb board rounding the top
of the firebowl.
(3)
Take all the packing materials away except for the paper
honeycomb board rounding the top of the firebowl.
STEP 3.
(I) Check each part before using the product. Make sure the gas supply
system is turned "OFF" before assembling.
See Figure C.
(II)Put the gas tank in the metal tank seat. Make sure the gas tank sits on
the metal seat completely. Turn the wing screw on the outer part of
metal seat clockwise to secure the gas tank tightly.
See Figure F
(III) Locate the battery, remove the plastic cover first. Unscrew the
rubber cap of the Electric Ignitor, place a AAA battery into the battery
case. Make sure the positive pole ("+") towards the cap. Screw the cap
back to the battery case tightly.
See Figure D.
(IV)
Place the lava rock averagely in the fire bowl on the top of
the firebowl.
See Figure E.
** DO NOT COVER THE IGNITION SCREEN when
placing the lava rock into the fire bowl. Always keep
Ignition SCREEN visible.
** Connect the Pressure-Regulating Valve to the gas tank.
See Figure H.
1) Turn the cylinder valve clockwise to close the gas supply
on the gas tank.
2) Screw Regulator Coupling clockwise by hand only. Make
sure it is fastened.
H
6
Summary of Contents for WAR-979
Page 5: ...5 B A...
