QC-862
Warning
•
Keep fountain out of reach of children.
•
Use proper power source as indicated on water pump label.
•
Keep electrical cords away from all heat sources. D not place electrical cords in high temperatures.
•
Check water level at pump location regularly, avoid damage the pump must be fully submerged.
Parts:
1.
Pump with tubing- 1 pc
2.
Fountain Body-1 pc
3.
Transformer- 1 pc
4.
Back door to fountain- 1 pc
Assembly:
1.
Connect pump with tubing and
place into fountain via the back
opening.
2.
Connect transformer to pump,
leave outside of the fountain, do
not get wet.
3.
Add water, and insert the back
door of the fountain.
4.
Plug in pump.
Troubleshooting:
Pump operates but no water flow: Make sure pump is fully submerged in water. If there is still no water flow, please
turn pump on then off several times.
Water speed: Adjust the switch control located on the pump housing.
Noise from pump/Fountain: Make sure pump is fully submerged in water.
